Chinese Professional Meter Out Flow Control - Built-in Shut-off Motor Valve for Smart Gas meter – Zhicheng
Chinese Professional Meter Out Flow Control - Built-in Shut-off Motor Valve for Smart Gas meter – Zhicheng Detail:
Installation location
The motor valve may be installed in the smart gas meter.
Product Advantages:
Built-in screw Motor Valve’s Advantages
1.Low pressure drop
2.Stable structure Max pressure can reach 200mbar
3.Small shape, easy installing
4.Low costs
5.Snap design with high rust resistance
Instruction For Use
1.Two-line, four-line and five-line models are available for this type of valve. The red wire is connected to positive power (or negative power), and the black wire is connected to negative power (or positive power) to open the valve (specifically, it can be set according to customer needs). The other 2 or 3 wires can be signal wires of open/close.
2.Four-wire or five-wire valve opening and closing process time setting: When opening and closing the valve, when the detection device detects that the opening or closing valve is in place, it needs to delay 300ms before stopping the power supply, and the total time of opening the valve is about 1s.
3.The minimum drive voltage of the valve shall not be lower than 3V. If the current limit design is in the process of opening and closing the valve, the current limit value shall not be lower than 120mA
4.The motor valve opening and closing can be judged by detecting the locked-rotor current in the circuit. The locked-rotor current value can be calculated according to the working cut-off voltage of the circuit design, which is only related to the voltage and resistance value.
Tech Specs
| Items | requirements | Standard |
|
Working medium |
Natural gas,LPG |
|
|
Flow range |
0.016～6m3/h |
|
|
Pressure Drop |
0～15KPa |
|
|
Meter suit |
G1.6/G2.5 |
|
|
Operating voltage |
DC3～3.9V |
|
|
ATEX |
ExicⅡBT4 Gc |
EN 16314-2013 7.13.4.3 |
|
Operating temperature |
-25℃～60℃ |
EN 16314-2013 7.13.4.7 |
|
Relative humidity |
5%～90% |
|
|
Leakage |
2KPa or 7.5ka ＜1L/h |
EN 16314-2013 7.13.4.5 |
|
Motor electric performance |
21±10%Ω/14±2mH |
|
|
Current-limited resistance |
9±1%Ω |
|
|
Max current |
≤140mA(DC3.9V) |
|
|
opening time |
≤1s(DC3V) |
|
|
Closing time |
≤1s(DC3V) |
|
|
Pressure loss |
With meter case≤200Pa |
EN 16314-2013 7.13.4.4 |
|
endurance |
≥10000次 |
EN 16314-2013 7.13.4.8 |
|
Installation location |
Inlet |
Product detail pictures:
Related Product Guide:
We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to deliver you with great provider of processing for Chinese Professional Meter Out Flow Control - Built-in Shut-off Motor Valve for Smart Gas meter – Zhicheng , The product will supply to all over the world, such as: Belgium, Istanbul, Los Angeles, For many years, we now have adhered to the principle of customer oriented, quality based, excellence pursuing, mutual benefit sharing. We hope, with great sincerity and good will, to have the honor to help with your further market.
By Jacqueline from Bulgaria - 2018.06.18 19:26
The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.
By Eartha from venezuela - 2017.02.28 14:19
